Karuna East and West Buildings 

 

Karuna East & West Buildings at One North | Portland, OR

“The light gauge solution cut weeks out of the project schedule, and provided precise construction of the structural elements to within an impressive 1/8” of the design.”

– Adam Petersen, Project Manager, R&H Construction (GC)

 
     
   
     
 

 

Duke Ellington School of the Arts (DESA) | Washington, DC

“Onboarding Radius Track provided a 180 degree direction change on the theater skin scope of work. They started solving challenges right from the start 
and clearing the fog. Before Radius Track, making the jump from the theater structure to the finished skin was shaping up to be a nightmare.”

– Gabe Oliver, Project Manager, GCS Inc. (GC)

 Duke Ellington School of the Arts 
     
  
   
 York University Station 

 

York University Station | Toronto, ON, Canada

“We did not have to worry about the geometry and setting out points. Radius Track provided a very clear layout system that we used to set everything from the curved hat-channel to clip angles, curved frames and finally the standing seam metal roof. It all fit and was quite amazing.”

– Trevor McGrath, Estimating Manager, Bothwell-Accurate (Roofing Contractor)
 
     
   
     
 

 

Faena Forum Theatre | Miami Beach, FL

“Radius Track added value and solved technical challenges for the project at every step, from engineering, consulting, and fabrication through installation assistance. It seemed as if their Senior Design Technologist was available to us 24/7.”

– Bill Hassel, President & Owner, Titus Construction Group 
(Framing & Drywall Contractor)

 Faena Forum 
     
   
     
 Frost Museum of Science 

 

Frost Museum of Science | Miami, FL

“Due to our past collaboration with Radius Track, we approached them to assist us with the design development and documentation of the façade system. Radius Track 3D modeled and fabricated the structural framing and detailed the exterior façade system, as the requirements exceeded our in-house capabilities. They also designed and we jointly fabricated the aesthetic and NOA mockups.”

– Paul Wolmarans, CEO, Kenpat–USA (Exterior Wall System Contractor)
 
     
   
     
 

 

Del Amo Fashion Center | Torrance, CA

“The product was spot on and 
their framing design delivered the complex geometry of the design intent. They have the expertise and technology to deal with all aspects of complex framing.”

– Francisco Sanchez, Project Manager, Nevell Group, Inc. (Framing & Drywall Contractor)
 Del Amo Fashion Center